High Grade Zinc Intersected from Maiden Drilling at Udias
Released
Released
Announcement PDF
ASX Announcement | 24 February 2025
Variscan Mines Limited (ASX:VAR)
MAIDEN DRILLING AT UDIAS INTERCEPTS SUBSTANTIAL HIGHGRADE ZINC INTERVALS
Highlights
•
•
•
•
•
•
Maiden underground drilling campaign at Udias Mine has delivered exceptional highgrade zinc (Zn) and lead (Pb) intercepts from discovery targets.
Assays from first 5 diamond drillholes confirm significant mineralisation:
o
o
o
o
o
UDDT004:
UDDT002:
UDDT001:
UDDT005:
UDDT003:
20.1m @ 8.22% Zn, 1.72% Pb
16.5m @ 6.16% Zn, 0.87% Pb
7.8m @ 7.41% Zn, 0.68% Pb
11.4m @ 4.76% Zn, 0.24% Pb
11.0m @ 4.92% Zn, 0.04% Pb
Initial drilling has focused on targets in previously undrilled areas.
Mineralised zones are interpreted to represent a more extensive trend, which remains
open and has strong potential for Mineral Resource Estimate growth over San Jose –
Udias.
Drilling set to continue for remainder of H1 to test highly prospective and underexplored Zn mineralised system.
More extensive underground and regional exploratory drilling plans for tenement
package in the final planning and permitting stages.
Variscan Mines Limited (ASX:VAR) (“Variscan” or “the Company”) is pleased to announce assay
results from its maiden drilling campaign at the Udias Mines, part of the Novales (San Jose)-Udias
Project in northern Spain.
Outstanding drilling results highlight growth potential
The Udias Mine complex has a large footprint of under-explored workings (see insets of Figures 1 & 4).
The maiden drilling campaign was designed to test priority discovery targets in previously undrilled
areas. It has successfully discovered new zones of mineralisation and corroborates with historical face
sampling data 1 to confirm that past production from Zn-oxide did not exploit the high-grade and zincrich primary sulphide mineralisation.
1
Refer ASX Announcement 10 September 2024
Assay results from the diamond drilling indicate that mineralised zones extend well beyond the current
geological and Mineral Resource Estimate (MRE) model and remain open. The drilling at Udias has also
demonstrated strong geological similarity with mineralised zones in the San Jose Mine, indicating they
are part of the same minerals system. Drilling is continuing to confirm the upside of this largely underexplored yet highly mineralised area.
Figure 1. Plan view of southern end of the Udias Mine indicating locations of underground diamond
drillholes, mine development and historical face samples 2 Insert shows location relative to the size and
scale of the Udias Mine, as well the continuation into the San Jose/Novales Mine to the northeast.
2
Refer ASX Announcement 10 September 2024
2
Figure 2. Orientated view of southern end of the Udias Mine showing drillhole locations.
3
Figure 3. Diamond Drill Core from UDDT004 illustrating massive sphalerite hosted in dolostone
Note: Hole depth shown is from 0m to 20.1m
Drilling progressing according to plan
As recently advised, 9 diamond drill holes have been completed using the Company’s own portable drill
rig and staff 3. Drilling reported in this announcement has been conducted in the southern end of the
Udias Mine in the upper A Level (shown in blue in Figure 4). The drill has now moved to the middle B level
(shown in pink in Figure 4) to drill test this underlying mineralised horizon. There has been no previous
drilling on either A or B levels as the Udias Mine, which closed in 1930, was only historically exploited
for calamine (a secondary Zn carbonate mineral formed by the oxidation of Zn sulphides), leaving zinc3
Refer ASX Announcement 17 February 2025
4
rich sulphides in-situ. Access to the underground mine has allowed mapping, sampling and drilling
short (up to ~30 m) , cost-effective drillholes. Drilling at Udias is expected to continue for the remainder
of H1/25 to test this highly prospective and under-explored complex. The areas being drilled are all
located outside of the existing MRE model and are expected to add to an updated MRE, anticipated for
later in 2025.
Figure 4. Plan view of southern end of the Udias Mine indicating areas of drilling, development and
mine access
5
Additional underground drilling and plans for exploration of wider project tenement
areas also being finalised
Planning ahead, the management and geological teams are finalising priority drill targets to further
upgrade the MRE and highlight the scale of the opportunity presented by the Novales-Udias Project.
This will likely involve both surface and underground drilling, reinforcing the Company’s ExplorerProducer strategy which is designed to leverage the advantages represented by our advanced, derisked and high-grade former mines, while recognising the potential opportunities in and around
surrounding areas that remain underexplored. Permitting for surface drilling is at a very advanced stage
and subject to capital, could be actioned almost immediately.
Next Steps & Way Forward
The Novales-Udias Project continues to progress, with the following demonstrable milestones
expected:
•
•
•
•
Assay results from Q4/24 underground drilling at the San Jose Mine 4
Results from ongoing metallurgical and geotechnical test work
Geophysical survey results at Guajaraz project
Further assay results from underground drilling at the Udias Mine
Variscan’s Managing Director & CEO, Stewart Dickson, said:
“Drilling at the Udias Mine for the first time has certainly yielded fantastic results with an outstanding
set of thick, high grade zinc intercepts.
We have been excited about the potential of Udias ever since we successfully acquired a license area
to gain access to it. The Udias Mine complex is significantly larger than the San Jose Mine with the
current drilling outside of the Mineral Resource Estimate, therefore there is genuine potential to add
significant tonnage and scale to this high-quality project. These drilling results continue to reinforce the
significant growth prospects at the Novales-Udias Project.
We are excited about the opportunity to extend the mineralisation footprint over the Udias Mines
through our current campaign. We expect the drill rig to turn at Udias for the foreseeable future as we
explore, define and expand our high-grade Mineral Resource Estimate. We have made a very successful
start and have an exciting future as we look forward to reporting further drilling results as they become
available.
We are delivering on our clear strategy to unlock value via re-starting production and exploration at one
of the highest-grade, development stage zinc deposits in Europe, which is continuing to produce
excellent results and make substantial progress.”
4
Refer ASX Announcement 17 February 2025
6
ENDS
This ASX announcement has been approved by the Board and authorised for issue by Mr Stewart Dickson,
Managing Director and CEO, Variscan Mines Limited
For further information, please contact:
Variscan Mines Limited (ASX:VAR)
Stewart Dickson
Managing Director & CEO
E: stewart.dickson@variscan.com.au
T: +44 (0) 7799 694195
Media & Investor Enquiries
Jane Morgan Management
Chloe Hayes / Jane Morgan
E: chloe@janemorganmanagement.com.au / jm@janemorganmanagement.com.au
P: + 61 (0) 458619317/ +61 (0) 405 555 618
About Variscan Mines Limited (ASX:VAR)
Variscan Mines Limited (ASX:VAR) is a growth oriented, natural resources company focused on the acquisition,
exploration and development of high-quality strategic mineral projects. The Company has compiled a portfolio of
high-impact base-metal interests in Spain, Chile and Australia. Its primary focus is the development of its
advanced zinc projects in Spain. The Company’s name is derived from the Variscan orogeny, which was a geologic
mountain building event caused by Late Paleozoic continental collision between Euramerica (Laurussia) and
Gondwana to form the supercontinent of Pangea.
To learn more, please visit: www.variscan.com.au
For more information
Follow us on LinkedIn
Follow us on Twitter
Visit our investor website: www.variscan.com.au
7
Project Summary
The Novales-Udias Project is located in the Basque-Cantabrian Basin, some 30km southwest from the regional
capital, Santander. The project is centred around the former producing San Jose underground mine with a large
surrounding area of exploration opportunities which include a number of satellite underground and surface
workings and areas of zinc anomalism identified from recent and historic geochemical surveys. Variscan has
delineated a significant 9km mineralised trend and a sub-parallel 3km trend from contemporary and historical
data across both the Buenahora exploration and Novales mining permits.
The San Jose Mine is nearby (~9km) to the world class Reocin Mine which is the largest known strata-bound
carbonate-hosted Zn-Pb deposit in Spain 5 and one of the world’s richest MVT deposits 6. Further it is within
trucking distance (~80km) from the San Juan de Nieva zinc smelter operated by Asturiana de Zinc (100% owned
by Glencore). Significantly, the Novales-Udias Project includes a number of granted mining tenements 7.
Novales-Udias Project Highlights
• Near term zinc production opportunity (subject to positive exploration and development work)
• Updated JORC compliant Mineral Resource Estimate of 3.4Mt @ 7.6% Zn, 0.9 %Pb released in December
2024
• Large tenement holding of +100 km2 (including a number of granted mining tenements)
• Regional exploration potential for further discoveries analogous to Reocin (total past production and
remaining resource 62Mt @ 8.7% Zn and 1.0% Pb 89)
• Novales-Udias Project is within trucking distance (~ 80km) from the zinc smelter in Asturias
• Classic MVT carbonate hosted Zn-Pb deposits
• Historic production of high-grade zinc; average grade reported as ~7% Zn 10
• Simple mineralogy of sphalerite – galena – calamine
• Mineralisation is strata-bound, epigenetic, lenticular and sub-horizontal
• Reported historic production of super high grade ‘bolsas’ (mineralised pods and lenses) commonly 1020% Zn and in some instances +30% Zn 11
• Access and infrastructure all in place
• Local community and government support due to historic mining activity
Velasco, F., Herrero, J.M., Yusta, I., Alonso, J.A., Seebold, I. and Leach, D., (2003) ‘Geology and Geochemistry of the Reocin
Zinc-Lead Deposit, Basque-Cantabrian Basin, Northern Spain’ Econ. Geol. v.98, pp. 1371-1396.
6
Leach, D.L., Sangster, D.F., Kelley, K.D., Large, R.R., Garven, G., Allen, C.R., Gutzner, J., Walters, S., (2005) ‘Sedimenthosted lead-zinc deposits: a global perspective’. Econ. Geol. 100th Anniversary Special Paper 561 607
7
Refer to ASX announcement of 29 July 2019
8
Velasco, F., Herrero, J.M., Yusta, I., Alonso, J.A., Seebold, I. and Leach, D., 2003 - Geology and Geochemistry of the Reocin
Zinc-Lead Deposit, Basque-Cantabrian Basin, Northern Spain: in Econ. Geol. v.98, pp. 1371-1396.
9
Cautionary Statement: references in this announcement to the publicly quoted resource tonnes and grade of the Project
are historical and foreign in nature and not reported in accordance with the JORC Code 2012, or the categories of
mineralisation as defined in the JORC Code 2012. A competent person has not completed sufficient work to classify the
resource estimate as mineral resources or ore reserves in accordance with the JORC Code 2012. It is uncertain that following
evaluation and/or further exploration work that the foreign/historic resource estimates of mineralisation will be able to be
reported as mineral resources or ore reserves in accordance with the JORC Code 2012.
10
These figures have been taken from historical production data from the School of Mines in Torrelavega historical archives.
11
Reports of the super high-grade mineralisation are supported with historical production data from the School of Mines in
Torrelavega historical archives. (Refer ASX release 29 July 2019)
5
8
Figure 5. Map of Novales-Udias Project Licence Areas with Udias Mine highlighted
Figure 6. Map of Novales-Udias Project Licence Areas and local infrastructure
9
Competent Person Statement
The information in this document that relates to technical information about the Novales-Udias project is based
on, and fairly represents information and supporting documentation compiled and reviewed by Dr. Mike
Mlynarczyk, Principal of the Redstone Exploration Services, a geological consultancy acting as an external
consultant for Variscan Mines. Dr. Mlynarczyk is a Professional Geologist (PGeo) of the Institute of Geologists of
Ireland, and European Geologist (EurGeol) of the European Federation of Geologists, as well as Fellow of the
Society of Economic Geologists (SEG). With over 10 years of full-time exploration experience in MVT-style zinclead systems in several of the world’s leading MVT provinces, Dr. Mlynarczyk has sufficient experience which is
relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is
undertaking to qualify as a Competent Person as defined in the December 2012 edition of the “Australasian Code
for Reporting of Exploration Results, Mineral Resources and Ore Reserves” (‘JORC Code’). Dr. Mlynarczyk
consents to the inclusion in the report of the matters based upon the information in the form and context in which
it appears.
The information in this document that relates to previous exploration results was prepared pre-2012 JORC code.
It is the opinion of Variscan that the exploration data is reliable. Although some of the data is incomplete, nothing
has come to the attention of Variscan that causes it to question the accuracy or reliability of the historic
exploration.
Forward Looking Statements
Forward-looking statements are only predictions and are not guaranteed. They are subject to known and unknown
risks, uncertainties and assumptions, some of which are outside the control of the Company. Past performance
is not necessarily a guide to future performance and no representation or warranty is made as to the likelihood of
achievement or reasonableness of any forward-looking statements or other forecast. The occurrence of events in
the future are subject to risks, uncertainties and other factors that may cause the Company’s actual results,
performance or achievements to differ from those referred to in this announcement. Given these uncertainties,
recipients are cautioned not to place reliance on forward looking statements. Any forward-looking statements in
this announcement speak only at the date of issue of this announcement. Subject to any continuing obligations
under applicable law and the ASX Listing Rules, the Company, its directors, officers, employees and agents do
not give any assurance or guarantee that the occurrence of the events referred to in this announcement will occur
as contemplated.
10
JORC Table 1, Sections 1 and 2
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling
(eg cut channels, random chips,
or specific specialised industry
standard measurement tools
appropriate to the minerals
under investigation, such as
down hole gamma sondes, or
handheld XRF instruments, etc).
These examples should not be
taken as limiting the broad
meaning of sampling.
• Include reference to measures
taken to ensure sample
representativity and the
appropriate calibration of any
measurement tools or systems
used.
• Aspects of the determination of
mineralisation that are Material
to the Public Report.
• In cases where ‘industry
standard’ work has been done
this would be relatively simple
(eg ‘reverse circulation drilling
was used to obtain 1 m samples
from which 3 kg was pulverised
to produce a 30 g charge for fire
assay’). In other cases more
explanation may be required,
such as where there is coarse
gold that has inherent sampling
problems. Unusual commodities
or mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed
information.
• Drill type (eg core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (eg core
diameter, triple or standard
tube, depth of diamond tails,
face-sampling bit or other type,
whether core is oriented and if
so, by what method, etc).
•
Drilling
techniques
•
•
•
•
Drilling being reported has been sampled with industry best
practice methods (for the sake of representativeness - as
full core, because of its comparatively small diameter of 38
mm), and the samples were sent to the accredited ALS
Seville laboratory for analysis. The samples are considered
representative and include waste intervals on the periphery
of mineralised intersections. It is assumed that the
equipment used was calibrated correctly as per the internal
SOP’s at ALS.
The new drillholes reported are located in the southern part
of the Udias – San Jose complex of historic underground
mines near Novales, Cantabria. Unlike the San Jose Mine,
which produced zinc sulfide until the late 1990s, the much
larger Udias mines closed down in 1930 and only produced
calamine from the uppermost (oxidized) levels of
mineralization, remaining largely undeveloped and underexplored
All the drill holes reported in this news release consist of
underground diamond drillholes and were sampled as full
core from 37cm to 1.48m sample length (average 1.00m)
with at least a single 1m sample either side to cover the
periphery of the mineralised intersection.
The analytical method used by ALS is Zn-OG62h for Zinc and
Pb-OG62h for Lead, as well as Zn-AA07 for non-sulphide
(‘oxide’) zinc. These are considered appropriate for the
deposit type.
The new drillholes referred to in this press release are
underground diamond drillholes (core) completed using a
Hilti portable drill, at a core diameter of 38mm.
These new holes have not employed oriented core methods.
11
Criteria
JORC Code explanation
Drill sample
recovery
•
•
•
Logging
•
•
•
Subsampling
techniques
and sample
preparation
Method of recording and
assessing core and chip sample
recoveries and results
assessed.
Measures taken to maximise
sample recovery and ensure
representative nature of the
samples.
Whether a relationship exists
between sample recovery and
grade and whether sample bias
may have occurred due to
preferential loss/gain of
fine/coarse material.
Whether core and chip samples
have been geologically and
geotechnically logged to a level
of detail to support appropriate
Mineral Resource estimation,
mining studies and metallurgical
studies.
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc)
photography.
The total length and percentage
of the relevant intersections
logged.
• If core, whether cut or sawn and
whether quarter, half or all core
taken.
• If non-core, whether riffled, tube
sampled, rotary split, etc. and
whether sampled wet or dry.
• For all sample types, the nature,
quality and appropriateness of
the sample preparation
technique.
• Quality control procedures
adopted for all sub-sampling
stages to maximise
representativity of samples.
• Measures taken to ensure that
Commentary
• Drill core recovery for this batch of underground drillholes
was good, in the 87% – 99.0% range (average. 94.0%). Drill
core recovery information has been formally recorded for all
drillholes at this time, as it forms part of the detailed core
logging.
• No special methods have been used to maximise sample
recovery; as its occasionally low values are not caused by
core loss, but are related to presence of natural voids.
• The relationship between sample recovery and grade has not
been assessed thus far.
• Detailed geological and geotechnical logging has been
carried out for all reported drillholes. Currently there is
sufficient geotechnical and geological logging data to
support a Mineral Resource estimate for the San Jose – Udias
complex of historical underground mines, which was
recently significantly upgraded, however, the reported drill
holes are located outside of the resource area and additional
drilling is required to be able to include this drilling area into
the mineral resource.
• Total percentage of holes that have been logged for lithology,
veins, alteration, and mineralisation is 100% and the total
percentage of new drillholes that has detailed recovery and
geotechnical logging is 100% at this stage (based on all logs
available). All of the drill core from the reported batch was
photographed before sampling, which was especially
important, as unlike some of the previous underground
drilling campaigns of Variscan Mines, full core was assayed
this time.
• New drillholes have been sampled using reasonable industry
procedures for logging (of mineralisation), sampling, and
QAQC for this project.
• The samples were selected by geologists for these new
drillholes based on logging of mineralised intervals, and full
core was sampled. Samples were preferred at 1m lengths,
although they were permitted flexibility from 37cm to 1.48m
sample lengths where geological boundaries existed. A
minimum of three samples were taken for any mineralised
intersection, the first sample encompassing the mineralised
zone and the other two samples selected either side to
ensure waste intervals were sampled to define the
boundaries of mineralisation. Additionally, when a separate
geological zone of rubble or broken core began, a new
sample was taken and when solid core resumed the next
samples were selected. In zones of poor recovery <80% the
12
Criteria
JORC Code explanation
Commentary
the sampling is representative of
the in-situ material collected,
including for instance results for
field duplicate/second-half
sampling.
• Whether sample sizes are
appropriate to the grain size of
the material being sampled.
default sample intervals were the drillers depth markers. The
nature and quality of sampling techniques are considered
appropriate for this deposit and drilling type.
• All full core samples were sent directly to ALS Seville
laboratory for preparation and subsequent analysis,
according to industry standards with crushing, pulverizing
and splitting prior to sample analysis.
• Sample sizes taken for the drilling reported (i.e., full core) are
considered suitable for the deposit type and style of
mineralisation at this stage of exploration.
Quality of
assay data
and
laboratory
tests
• The nature, quality and
appropriateness of the assaying
and laboratory procedures used
and whether the technique is
considered partial or total.
• For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the parameters
used in determining the analysis
including instrument make and
model, reading times,
calibrations factors applied and
their derivation, etc.
• Nature of quality control
procedures adopted (eg
standards, blanks, duplicates,
external laboratory checks) and
whether acceptable levels of
accuracy (ie lack of bias) and
precision have been established.
Verification
of sampling
and assaying
• The verification of significant
intersections by either
independent or alternative
company personnel.
• The use of twinned holes.
• Documentation of primary data,
data entry procedures, data
verification, data storage
(physical and electronic)
protocols.
• Discuss any adjustment to assay
• For the new drilling reported the sampling is considered total
as no drill core remains. The laboratory is accredited (ALS
Seville) and the techniques for Zn/Pb (Zn-OG62h, Pb-OG62h,
and Zn-AA07) are considered suitable for the elements in
question.
• No handheld or downhole geophysics data were collected
during this campaign.
• QAQC Procedures adopted for this batch of drilling results
included a total of thirteen QAQC samples inserted into the
sample stream (total of 77 drill core samples, not including
QAQC). These included two high-grade CRM (OREAS 134B)
inserted into the mineralised zone, one medium grade CRM
(OREAS 133A) and two low grade CRMs (OREAS 130) inserted
in between waste rock or barren samples, as well as four
blanks. Also, internal duplicates were requested to ALS for
four mineralised samples and these sample ID’s were
indicated to the laboratory. In total, for the batch of samples
reported within this press release the QAQC samples
comprised 14.4% of the sample population submitted for
analysis. This frequency and variety of QAQC samples
inserted into the sample stream is considered reasonable;
with industry best practice typically requiring 10-20% of the
sample population to be QAQC samples in the sample
stream. The QAQC sample results were interpreted and
showed good repeatability.
• Analytical processes are being supervised by senior ALS staff
experienced in mineral assaying.
• The new diamond drillholes are located in the uppermost
stopes of the southern part of the historic Udias underground
mine.
• Primary data for this underground drilling campaign is
currently stored in excel and all assay certifications and final
assay results provided by ALS Seville have been reviewed.
• Assay data are reported in two ways within this press release,
the first are raw assay values unchanged or altered, and the
second are calculated significant intercepts or aggregated
13
Criteria
JORC Code explanation
Commentary
data.
Location of
data points
• Accuracy and quality of surveys
used to locate drill holes (collar
and down-hole surveys),
trenches, mine workings and
other locations used in Mineral
Resource estimation.
• Specification of the grid system
used.
• Quality and adequacy of
topographic control.
•
•
Data spacing
and
distribution
Orientation of
data in
relation to
geological
structure
• Data spacing for reporting of
Exploration Results.
• Whether the data spacing and
distribution is sufficient to
establish the degree of
geological and grade continuity
appropriate for the Mineral
Resource and Ore Reserve
estimation procedure(s) and
classifications applied.
• Whether sample compositing
has been applied.
•
• Whether the orientation of
sampling achieves unbiased
sampling of possible structures
and the extent to which this is
known, considering the deposit
type.
• If the relationship between the
drilling orientation and the
orientation of key mineralised
structures is considered to have
introduced a sampling bias, this
should be assessed and
reported if material.
•
•
•
consecutive sample intervals using sample length weighted
mean grades for Zn and Pb, assuming an ore grade of zero for
the intervals with missing drill core (natural voids).
The underground drillhole collars reported here were
surveyed using an 'all-in-one’ laser disto device
(incorporating digital compass, clinometer and distance
meter) placed on a 4kg tripod to avoid movements and a
topographic rod (with bubble level) to mark the position of
the points, which was then tied to a reference point located
at the mine entrance that was surveyed with a highresolution GPS (+/- 1 cm). Checks were made with a Brunton
compass to verify that there were no measurements errors.
These are considered relatively accurate, yet a very detailed
3D laser survey of these mine stopes is currently under way.
All the maps and 3D models referenced in this report have
been made with ETRS89.
The reported drillholes have been drilled in various
orientations (both downward and upward) from drilling pads
underground, and their spacing is variable (see table in
Appendix 1). At this stage there is no sufficient distribution of
drillholes to support geological and grade continuity for the
southern part of the Udias mine, however, underground
geological mapping and visuals on zinc mineralization
confirm it. Further drilling is required to improve geological
confidence in this interpretation.
Assay data for the new drillholes are reported in two ways
within this press release, the first are raw assay values
unchanged or altered and the second are calculated
significant intersections or aggregated consecutive sample
intervals using sample length weighted mean grades for Zn
and Pb. There were occasional sample intervals where drill
core could not be obtained due to the presence of natural
cavities, these intervals were manually set to 0% Zn and 0%
Pb prior to calculating mean grades for intersections.
Mineralisation at the project occurs as stratabound, subhorizontal and lenticular, following sub-vertical trends, and
with lateral and vertical extensions with a significant control
by steeply-dipping feeder fault zones. Mineralisation in this
setting presents as ‘bags’ (pods) with sub-horizontal
lenticular form. Due to the irregular and/or variable nature of
the mineralisation, an estimate of potential bias through
orientation of sampling has not been made.
While the location of mineralisation centres on the Novales
trend follows a broad NNE strike, the orientation of distinct
orebodies on this trend is understood to be variable both in
terms of strike and dip. Underground drilling is often radial in
nature, and no comment can be made on the orientation of
drilling in respect of mineralisation orientation.
14
Criteria
JORC Code explanation
Sample
security
• The measures taken to ensure
sample security.
Audits or
reviews
• The results of any audits or
reviews of sampling techniques
and data.
Commentary
• New drillholes have been oriented at a variety of orientations
both drilling above and below (positive and negative dips)
from the historical mine stopes, to intersect mineralised
lenses located above and below. These orientations are
considered appropriate for the geometry of this mostly
lenticular MVT mineralisation at Udias.
• Samples were securely stored at the locked on-site core
shed and were handed directly to a courier for transport to
ALS Seville. Samples were logged and collected on site under
supervision of the responsible Variscan geologists.
• No detailed 3rd party audits have taken place regarding the
sampling techniques for new drillholes.
Section 2 Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
•
Type, reference name/number,
location and ownership inclu
Share your feedback
Discover